Geemarc Amplicall 16 Amplified Doorbell and Alert
AMPLICALL 16 consists of a doorbell and an amplified alert. For installation, please use these instructions in conjunction with the diagram on Page 2 of the User Guide.
When opening the box you will find:
1 x Amplicall 16 unit
1 x Bell push
1 x Table mounting unit,
4 x AA Batteries.
4 x screws and rawl plugs (2 for the bell push, 2 for wall-mounting the Amplicall 16)
1 x self-adhesive pad for attaching the bell push
To install the batteries:
- Place the main unit on the table.
- Open the battery compartment on the back of the unit.
- Insert the four AA batteries supplied, ensuring the batteries are inserted as per the “+” and “-“ raised markings in the battery compartment.
- Once the batteries have been inserted close the battery compartment.
The Amplicall 16 can be used on the base provided, or it can be wall mounted with the screws provided. To connect the Amplicall 16 to the base:
Place the Amplicall 16 unit on the base, so that the shorter supports on the base are to the front of the Amplicall 16 and the longer supports to the rear.
- Gently push down on the Amplicall 16 until the unit clicks into place on the base unit.
The bell push can be attached to your door frame with either the screws or self-adhesive pad provided. The unit is now ready to operate.
How to operate:
On the right-hand side at the top of the Amplicall 16 is the volume control. Slide the switch to set it to your preferred volume or set to “off”.
In order to work wirelessly, the bell push is paired to the Amplicall 16 at the factory prior to dispatch, so you do not need to pair them together.
On the front of the Amplicall 16 unit there is a green low-battery warning indicator.
Please note that this is a guide to be used in conjunction with the images in the User Manual. Call Hearing Market on 0800 6122 768 or email tom@hearingmarket.co.uk for any further queries.